Camber plates designed specifically to meet the needs of your BMW E46 M3 and Z4 M. More positive camber adjustment range (still with tons of negative, too) for lowered street driven M cars ONLY. Featuring CNC construction for the bearing holder and main plate, including engraved: hash marks for adjustment, side and front markings, and the snazzy Vorshlag "VM" logo. Perfect for street or track use for non-m models. Easily adjust camber trackside with Vorshlag camber/caster plates. Oversized spherical bearings are designed to withstand the rigors of street and track abuse. All components are plated for maximum corrosion resistance and long life.
In order to properly use Vorshlag camber plates, you must choose spring perches that match your strut brand and spring type. Vorshlag camber/caster plates are designed to be compatible with 2.5”, 2.25" and 60mm “coilover” style springs, OEM style springs, and all strut types.
Spring Perches: Please pick the spring perch diameter that works with the springs you have. Coilover springs typically come in one of three diameters: 2.25", 60mm and 2.5". Ground Control coilovers are supplied with 2.5" dia and TCKline supplied coilovers are 60mm dia springs. KWs coilovers tend to be 60mm but some of these and some Bilstein PSS series coilovers use the OEM upper perch (a tapered spring - see pics below). Z4 non-M's using stock style springs need to select the E36 non-M OEM Perch, while Z4 M's need to select the E46 M3 OEM Perch.
Radial Bearings: The standard radial bearing is our Double Row Heavy Duty sealed bearing. This is much stronger than the stock radial bearing and what 95% of customers pick for their camber plates, and should last the life of the car. It is extremely over-spec'd and we've never had one returned for repair. There is also an optional Race-duty "short" single row sealed axial bearing that can be used in any Vorshlag upper spring perch (except for Bilstein/Inverted coilover style). The Race bearings replace the double row bearing and are 5mm shorter - effectively reducing stack-up height and adding 5mm more suspension travel (at the same ride height setting). See the pictures below for a graphic illustration of the height difference. It is recommended for race duty only but the OEM perch also had a single row ball bearing in this location. Vorshlag tested this single-row bearing set-up for 2 seasons of race use on an E36 with 285 R compounds and 18x10" wheels. Lots of abuse, good results, more suspension travel. This is just not a bulletproof street duty bearing like the double row.
Strut Style: Please pick your strut brand and sizes from the drop down below. This helps us build the spring perches to fit your struts with a tight tolerance and no slop - for quiet, reliable use. If you do not know what struts you have please have a reputable BMW shop inspect them, as most mechanics can spot the differences with a quick look. There are also new struts and updates to existing models that come out from time to time. If your strut is not listed, please pick the "Other" option and let us know what brand and model struts you have in the order notes. Note: Koni makes struts for some BMWs with both tapered and square shaft shoulder transitions, so if you have Koni struts please inspect your struts before ordering (or let us know when and where they were purchased, which helps Vorshlag determine what style to build for).
