Profile Information

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Ground Control Sport Camber Plates for 2015-2018 BMW F87 M2

Ground Control Sport Camber Plates for 2015-2018 BMW F87 M2

Be the first to review this product

Product Code: SP-GC-CP-F87-T

Ships within 3-5 business days

Price: $569.00

* Required Fields

Price: $569.00


About These Plates

Not for M2 Competition models. For 2019+ M2C, use the F8x M2C/M3/M4 plates.

Fits only 2015-2018 model year F87 M2.

These plates feature over 30mm of total camber adjustment with the ability to make corrective caster changes to equalize side-to-side caster in the stock position.

Other features include replaceable waterproof German axial load bearings, and isolated aerospace grade strut bearings for long life, less deflection, on stock sized or aftermarket springs.

These plates are also engraved with an arched Ground Control logo which can be used to easily re-center the plate in the stock position for easy, repeatable, adjustment from street to track and back.

Camber is independently adjustable by the center slider, without removing any components from the car. The priority of this design is to allow fast, easy, and repeatable adjustment from street to track and back.

All components are anodized or zinc plated for corrosion resistance.

• A clean sheet design for street cars, not an adapted spherical race plate.
• Waterproof, German-made, axial load steering bearings.
• Allows for up to 30mm total camber adjustment.
• Unique slot design allows for caster correction.
• Aerospace grade strut spherical bearings.
• All components plated or anodized for corrosion resistance.
• Zinc plated mounting bracket for ease of install and adjustment.
• Reuses stock rubber spring pad for noise isolation.

OEM BMW upper spring isolator must be transfered onto camber plates when using factory diameter springs.

Strut Mount Options (please visually verify your strut mount before ordering):
3-bolt: Typically found on all M2 cars built on or before January 2015.
5-bolt: Typically found on all M2 cars built on or after February 2015.
We're happy to help! Please give us a call or email if you need assistance verifying your strut mount.

Installation Notes: Torque camber plate mounting nuts to 18ft/lbs using properly calibrated torque wrench. DO NOT USE PNEUMATIC TOOLS.

The Positives of Negative Camber

If you enjoy driving your car in a direction other than straight, you'll feel the beneifits of negative camber immediately on your first drive after installation. Dialing-in negative camber increases your tire's contact patch during cornering, which means more grip, less outer tire wear, and ultimately, faster lap times. And these beneifts aren't just limited to track use, you'll notice them every time you drive your favorite on-ramp or mountain road. We can go on for days about the benefits of negative camber, and we do! Check out our technical article.

Recommended For

Whether you are new to performance driving and looking to improve your skills behind the wheel, or an experienced racer, Ground Control Sport plates provide a broad range of camber and caster adjustment to ensure your alignment settings are ideal for any track or race environment. These plates are a new Ground Control design, specifically for newer F-chassis BMW models, and they can fit OEM springs, as well as 2.25,” 2.5,” or 60mm coilover spring diameters. Like all components engineered to maximize performance, some additional noise, vibration, and harshness (NVH) may be experienced, although it will be extremely minimal with this new design.

This is the only Ground Control camber plate available for this chassis. With the vast improvements made in chassis development and noise isolation, a “Street” plate that compromises adjustability to fit a large polyurethane bushing has become unnecessary.

Why Ground Control?

Ground Control has been building world-class street, autocross/track, and full road race suspension setups since the 1980s. From camber plates and adjusters, to complete bolt-on coilover kits, Ground Control has designed and built setups for hundreds of different chassis and applications. All Ground Control camber plates feature a proprietary bearing, made to their specs by Aurora in the USA, which allows for articulation of the shock shaft. These spherical bearings are very understressed, as the Ground Control design does NOT support the weight of the car on the spherical bearing. Instead, the weight of the car is supported by a completely separate articulating needle bearing, which is also manufactured for Ground Control in the USA.



Brand Ground Control
Vehicle Chassis BMW F87 M2
Camber Plate Type Sport Plate

© 2020 APEX Race Parts. All Rights Reserved.