DetailsMade-To-OrderBuild a Kit That Works For You
We know there’s no one-size-fits-all for coilover kits. We also know that there’s a difference between simply lowering your car, and actually improving its performance in a meaningful way. It is crucial that any coilover kit is built around a quality damper, which is why all of our kits are built around the JRZ RS Line. However, we all use our cars differently, so we offer the ability to customize a coilover kit using race-proven components to meet your specific goals and budget. Best of all, you can get it all from one place.What’s Included?
Our JRZ RS PRO coilover kits include the following components:
- 4x JRZ RS PRO Dampers
- 2x Ground Control Front Camber/Caster Plates
- 4x Hyperco 2.25" ID Coilover Springs
- 2x JRZ Rear Ride Height Adjusters
- 4x JRZ Soft Bump Stops
Optional Extras that can be added to your kit:
JRZ RS PRO DampersThe RS Line
- 2x or 4x Hyperco 2.25" ID Helper Springs with Helper Spring Guides
- 2x Ground Control Rear Articulating Weight Jacks (replaces rear height adjusters)
- 2x Ground Control Rear Shock Mounts
JRZ Suspension Engineering calls on over 60 years of experience in development and production of motorsport dampers. With numerous factors like track surfaces, weather conditions and tire compounds, the adjustability of JRZ dampers ensures you can utilize your car’s full potential at all extreme ends of the spectrum. All JRZ RS Line dampers are manufactured, measured, and individually tested in the Netherlands on the same production line as the $9,000+ JRZ Motorsport dampers.RS PRO Features
Large Adjustment Range
- Double-adjustable dampers
- Adjustable compression settings (14 clicks)
- Adjustable rebound settings (24 clicks)
- Adjustable nitrogen gas pressure
- Quick-disconnect reservoir plumbing for front dampers
All JRZ dampers allow adjustment between smooth daily driver settings and aggressive track/race settings. JRZ dampers are known for having an extremely “tactile” adjuster feel, meaning you can clearly distinguish how many “clicks” you’ve turned the dial. No more guessing or repeatedly going back to full soft and counting clicks.Ground Control Camber Plates TypesStreet Camber Plates
- Typically adjustable up to -2º of camber
- Typically 3/4º of caster correction
- Urethane bushing reduces NVH while improving handling response
If you enjoy your car predominantly on the street, these plates are for you. These are ideal for those who carve back country roads, push their luck on the occasional freeway on-ramp, or attend a few autocross or high performance driving events (HPDEs) per year. There is no metal-on-metal contact within the street plates. Instead, they use a urethane bushing as opposed to a solid metal bearing (like the race plates) to mount the strut, so they transmit far less noise, vibration, and harshness (NVH) than the spherical-bearing Race plates. If you want the performance benefits of negative camber without the metal-on-metal suspension feel, Street plates should be selected.Why Ground Control?
Ground Control has been building world-class street, track, and full road race suspension setups since the 1980s. They have designed and built setups for hundreds of different chassis and applications. From no-compromise racing camber plates to refined, comfortable street plates, Ground Control’s engineering and attention to detail makes them our camber plate of choice for any street or race application.Hyperco Coilover Spring OptionsChoose Your Rates
Note: All E85/86 Z4 kits use 2.25" ID springs in 5" length.
Front: 450 lbs/in; Rear: 550 lbs/in
Ideal for daily driving and canyon carving while still delivering predictable handling you’ll enjoy on the occasional track day. Body roll and brake dive will be greatly reduced compared to stock or lowering springs. Passengers or clients likely won’t mind the increased stiffness.
Front: 650 lbs/in; Rear: 750 lbs/in
Ideal for the driver who makes frequent track visits, often using performance tire compounds, and may want to drive their car to and from the track. Body roll is reduced even further than with Level 1 spring rates. Also suitable for street use, but non-enthusiast passengers may not enjoy the increased stiffness.
Front: 800 lbs/in; Rear: 900 lbs/in
These are no-compromise race spring rates. Ideal for cars that see more miles on the track than on the street. This setup is for minimal body roll and maximum responsiveness, meaning on-track handling will be extraordinary at the expense of comfort on the street.
Custom Rates & Lengths
Think you know better than us? Choose your own spring rates and lengths with this option.Why Hyperco?
We chose Hyperco springs mainly because of their near-perfect (within 2-4%) linear rates. They’re more resistant to bowing than most other brands of spring, and because of their highly developed design, the springs are able to maintain their original free length and rate throughout a near-infinite operational life.Choose Your Additional OptionsHyperco Helper Springs with Guides
Choose Pair to receive 2 helper springs & guides, which are typically used for the front only. Choose Set of 4 to receive 4 helper springs and guides to use at all 4 corners.
Although not required, helper springs are used to keep the main spring seated on the perches while the suspension is at full droop, such as during pit stops or when the vehicle becomes airborne. This will prevent additional noise as well by keeping the springs in constant contact with the perches.Ground Control Rear Weight Jacks
Add this option to replace the standard Ground Control rear height adjusters with weight jacks, which address the issue of inconsistent spring rates caused by the bending motion as the control arm articulates. As an added benefit, ride height can be adjusted with a socket from underneath without lifting the car. These parts are BMW CCA and SCCA IT legal.Ground Control Rear Shock Mounts
Urethane mounts reduce noise by using a polyurethane bushing. Recommended for street cars or cars that only see occasional track/autocross use.
Race Solid Bearing mounts minimize deflection by using a solid bearing. Recommended for dedicated track/race cars that see more miles on the track than the street.
All Ground Control shock mounts are much stronger than stock, and include heavy-duty hardware to reduce deflection and improve the performance of your dampers. All parts are anodized or zinc plated for corrosion resistance and long life. Reinforcement brackets strengthen the shock tower and are easily installed from above. Includes all hardware and gaskets.
Apex Actual Price No Brand JRZ Vehicle Chassis BMW E85/86 Z4 Damper Type Double Adjustable
- On-Car Gallery