×

Registration

Profile Information

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

18x9.5" ET22 APEX FL-5 Wheel

18x9.5" ET22 APEX FL-5 Wheel

Be the first to review this product

Product Code: FL51895ET22

Availability: Make Selections to See Availability

Price: $409.00

Sale Price $347.65 - $409.00

* Required Fields

Price: $409.00

Sale Price $347.65 - $409.00

Description

Details

FL-5 Design

Fit Matters
The right solution for every application

The FL-5 wheel includes details specifically implemented to enhance the BMW owners' track day and street performance experience. An optimized car setup begins with the right wheel and tire fitment, and without model-specific attention, maximum performance is compromised. These wheels were developed for various BMW chassis’s and will work in either square or staggered configurations.

Lip Sizes
One design, many levels of beauty

Two lip depths will be utilized to maximize spoke concavity and reduce weight on the FL-5 design.

The medium lip is offered on narrow-width applications, while the deep lip is offered on our wide-width applications. Lip depth is dependent on fitment, and not selected independently.

"I" Beam Spokes
More than just a pretty face

The spokes of the FL-5 were designed to be robust where they need to be, and extra lightweight where they should be. Weight is reduced by CNC machining material out from the sides of each spoke. It’s expensive and avoided by almost every manufacturer, but affordable with volume. In each size of our FL-5 designs, the I-beam spokes are carefully evaluated from structural aspects to ensure minimal weight, brake clearance, and remarkable strength.

Dual Flow-Formed

We use rotary forging for both the front and rear barrels on our FL-5 wheel designs. This produces the strongest lips possible, and we can optimize the depth of the front lip for every unique width and offset.

Beefier Lip
Ready for more abuse

By saving weight elsewhere, we’ve added extra material where it counts. We’re beefing up the barrel’s inner lip on the FL-5 to better handle the repetitive abuse seen on the track.

Hub Centric
No rings or adapters here

All APEX FL-5 wheels are purpose built for select vehicle applications, and centering rings are never required for any BMW application. All 5x120mm bolt pattern wheels feature a direct-fit, 72.56mm center bore.

Brake Clearance
A lot of room in a tight space

Spoke clearance is only half the problem. The barrel construction on a wheel also needs to be big enough to clear the sides of your caliper and rotor. Many aftermarket wheels that have aesthetic compromises in their design may work with smaller stock brakes, or smaller diameter big brake kits, but the larger kits will pose a major problem. The barrel of the FL-5 wheel offers unmatched caliper clearance because wheels shouldn’t limit your choice of aftermarket brake kits, and brake kits shouldn’t force you to run oversized wheels. We 2D modeled most Big Brake Kits available in Solidworks and tweaked the wheel design of the SM-10 prior to production in order to fit as many kits as possible.

Wheel Hardware
Original or Aftermarket, it all works

The FL-5 wheel can be used with all OEM and aftermarket mounting hardware with a 60° tapered seat. Lug bolts, wheel locks, and stud conversion kits all work perfectly. The FL-5 wheel also accepts wheel spacers without issue. The shallow rear chamfer allows the wheel to remain hub centric even when 5mm flat spacers are used. The chamfer is deep enough to clear the chamfered lip found on some aftermarket spacers that would typically cause improper seating of the wheel and, therefore, wheel vibration.

Center Cap
A factory fit and finish

We don't reuse one cap design for all our wheels. Every APEX wheel is designed to work with factory center caps. You can easily replace APEX center caps with OEM roundels for a clean factory look. APEX wheels will come with our redesigned, Gloss Black center cap that mimics the size and shape of a BMW factory center cap.

TPMS
They all fit

TPMS sensors, which monitor tire pressure, are one piece of technology that can't be compromised. The attention to OEM compatibility on the FL-5 wheel doesn't end with center caps. All APEX wheels accept OEM and aftermarket equivalent TPMS sensors, and any standard sized metal or rubber valve stem.

Click here to view our TPMS Application List.

APEX Standard

Flow Forming
Benefits of forging, without the pain

All APEX wheels are produced using the Flow-Forming technique. This process significantly reduces weight in the barrel, which has the greatest impact on rotational mass. During the manufacturing process, rollers apply high pressure to the inner barrel, compressing the aluminum into its final shape. This effectively eliminates porosity and aligns the grain structure of the metal, which increases tensile strength. The end result of the Flow-Forming process is a lightweight and extremely strong barrel that equals that of a traditional forged wheel at a fraction of the cost.

Testing & Certifications
We break a lot of wheels

Computer simulated stress tests are no match for real world testing when designing a lightweight wheel that will see extreme loads. All APEX wheels are crush and load tested to exceed JWL standards and those results are independently tested and certified in Japan by the 3rd party agency known as the VIA. Countless wheel companies falsely claim they are tested and certified by the VIA, and so they lack the certificates to prove it. We test and certify each and every design, diameter, width, and offset, separately.

Weight & Strength Optimization
It's all in the details

We’re taking more time than ever before on this step, revising and iterating our design to reduce weight as much as possible. We’re on this step right now and we’re still shaving off a fraction of a pound at a time. After many months of BMW-specific optimizations, we’ve minimized weight while maximizing strength. 19” wheels typically have less tire protecting them from the imperfections in the road, and that calls for load ratings that are 10% above the JWL/VIA’s standard. The result is a lightweight wheel with extra strength in all the right places. Use the SM-10 with confidence on both street and track.

Finishes
Because being faster is just not enough

The SM-10 and FL-5 wheels are available in multiple finishes. All APEX wheels are finished using a comprehensive multi-stage liquid paint system over a powder coated base coat. Standard finishes include gloss-metallic finishes, and semi-gloss or matte finishes. Often overlooked, painted or powder coated lug hole seats can cause hardware to loosen or begin the spread of paint chipping to more visible sections. The coating process of the wheels leaves lug holes, center bores and mounting pads untouched, which ensures proper fit and torque values.

Warranty
A wheel you can depend on

All APEX wheels are backed by a 2 year structural warranty and a 1 year finish warranty to the original. This warranty guarantees that all APEX wheels will be free from defects in materials, workmanship, and paint finish under normal and reasonable use.

Specifications

Specifications

Brand APEX
Model FL-5
Wheel Size 18x9.5" ET22
Wheel Diameter 18"
Wheel Width 9.5"
Offset ET22
Face Profile Deep Lip
Bolt Pattern 5x120mm
Center Bore 72.56mm
Load Rating 1,550 lbs
Weight 20.3 lbs
Reviews
On-Car Gallery

On-Car Gallery

Z4M Coupe Staggered Fitment

Click image below to zoom

Front: 18x8.5" ET35 Race Silver
Rear: 18x9.5" ET22 Race Silver

You may also be interested in the following product(s)