Everything you loved about the original. Now fully forged.
All New Fully Forged Wheels
An evolution of design and technology culminating in improved strength and reduced weights with added machining features and new premium finishes.
Now enhanced with all the added benefits of forged manufacturing. The ARC-8R is a significantly stronger version of our most popular flow formed design.
- Forged 6061-T6
- Paintless Knurled Beads
- Significantly Stronger
- Premium Finishes
- Increased Brake Clearance
- Lifetime Structural Warranty
10K Tons of Pressure
These wheels start as a cylinder of extruded aluminum that is forged by a die under 10,000 tons of pressure. This extreme pressure increases the strength of the material by eliminating porosity and improving the grain structure within the aluminum. It creates the perfect blank canvas to start from for our ultimate wheels.
To Die For
The designs and sizes offered by many companies are constrained by the blanks they can source from suppliers. What we found didn’t meet all our needs so we also designed and developed our own dies to stamp blanks that meet our exact specifications. The result? Our wheels can be made in the key sizes needed for racing.
“Forged” doesn’t mean strong. Many forged wheels focus on weight reduction so much that they end up with the same load rating as cast wheels. Think all forged wheels are stronger than cast or flow formed? Think again! We added up to 1,000 pounds of extra load capacity per vehicle compared to our flow formed line.Learn More
Our forged wheel line enabled us to release the finishes we’ve always hoped for. Fully polished aluminum, hand brushed with tinted clear, and a much wider range of painted finishes. Our forged wheels not only deliver performance, but also distinctive new styles as well.
Improved Brake Clearance
The flow formed ARC-8 was our first design so it features our older barrel profile with compromised clearance. Typical blank forgings can have even worse clearance than our original wheel. By developing our own new profiles and new dies, they can clear Brembo 380mm kits behind our 18” wheels and 400mm carbon ceramics behind our 19’s.Learn More
We conducted extensive Finite Element Analysis to reinforce high stress areas and to remove material where it didn’t improve strength. The end result is a fully forged wheel with an ideal balance of strength and weight.
Paintless Knurled Beads
Not all knurling is created equal. To reduce unwanted tire spin as much as we could, we protected our knurling from paint to keep them sharp. We didn’t take the cheaper shortcut of painting over the bead area, which makes the knurling smoother and rounder. See and feel the difference.Learn More
Tailored Fit, Off-The-Shelf
APEX is known for stocking many niche and spacer free fitments tailored specifically to a chassis. We’re releasing those same fitments… and more in our new forged line. Much lower production requirements will allow us to release a wider range of fitments that were previously off limits.
Many companies promote their wheels as being certified by the VIA when they actually aren’t. That’s like using the USDA logo on food without permission. APEX wheels get officially tested and registered by the VIA in Japan, and we have the proof to back it up.Learn More
JWL and Beyond
Japan’s JWL is a standard for wheel load ratings. Our new forged wheels exceed those ratings by almost 20%. Most manufacturers only meet the minimum, while some even fall below—yet they still claim to be JWL. Always verify load ratings before you buy.Learn More
All our forged wheels come with a lifetime structural warranty and 1 year finish warranty, so you can be confident in your purchase. See here for full terms and conditions.Learn More
50% Off Replacement Wheels
Do some serious damage to a wheel that’s not covered under warranty? No worries. Curb rash or even totally mangling a wheel in a car accident is covered by our APEX360° program. We offer replacements for wrecked wheels at 50% off our standard prices. See our full terms and conditions for more details.Learn More
Compare for Yourself
|Actual Weight (lbs)||18.85||19.10||19.20*||18.85|
|Max Load Rating (lbs)||1,550||1,800||1,521||1,521|
|JWL Required Load||Above||Above||Minimum||Minimum|
|Brembo 380mm Clearance||No||Yes||No||No|
|Paintless Knurled Bead||No||Yes||No||No|
|Fits OEM Center Cap||Yes||Yes||No||Yes|
|Center Cap Included||Yes||Yes||No||No|
|50% Off Replacements||Yes||Yes||No||No|
3rd Party Validation
Registration numbers are on each product page and can be validated in the VIA’s database. Ask other companies for their numbers.
NOT VIA Registered
All TA16 wheels are stamped with the VIA logo and were sold as “certified by the VIA” as of 8/12/19. This logo symbolizes certification and registration by the VIA. We confirmed that none of their wheels have been independently tested and registered by the VIA as of that date. *Update: As of 8/25/19 they now claim to be “tested according to VIA standards” instead of certified, but their wheels still have the logo. Click here to learn more.
NOT VIA Registered
Titan 7 advertises their wheels as being “tested to VIA standards” and they stamp all of their wheels with the official VIA logo. This logo symbolizes certification and registration by the VIA. We confirmed that none of their wheels have been tested and registered by the VIA as of 8/12/19. Click here to learn more.
Titan 7 advertises the weight of their 18x9.5" ET35 TS-5 wheel as 18.0 pounds, but we measured 19.20 on the scale that was used to measure all the other wheels.
All APEX wheels are purpose built for select vehicle applications to not require centering rings. All BMW specific 5x120mm bolt pattern wheels feature a direct-fit, 72.56mm center bore.
We don't charge extra for caps and we design ours to be interchangeable with the OE cap for a clean factory look. All APEX wheels come with our Gloss Black cap included. We also offer an optional red cap.
APEX wheels can be used with all OEM mounting hardware, proper aftermarket hardware and wheel spacers. Wheel locks and stud conversion kits also work perfectly.
All APEX wheels accept OEM and aftermarket Tire Pressure Monitoring Sensors and standard fit valve stems. If you don’t have sensors then select from our metal stems available in multiple finishes.
Just the right fit
|18x8.5"||ET45||~18.4||1,800||$585||Pre-Order in March 2020|
|18x9.0"||ET42||~19.3||1,800||$590||Pre-Order in March 2020|
|18x9.5"||ET58||~19.3||1,800||$595||Pre-Order in March 2020|
|18x9.5"||ET45||~18.7||1,800||$595||Pre-Order in March 2020|
|18x11.0"||ET44||~20.3||1,800||$610||Pre-Order in Q2 2020|
|18x11.0"||ET29||~21.0||1,800||$610||Pre-Order in Q2 2020|
|19x8.5"||ET35||~19.6||1,900||$685||Pre-Order in Q2 2020|
|19x9.0"||ET30||~19.8||1,900||$690||Pre-Order in Q2 2020|
|19x9.5"||ET45||~20.1||1,900||$695||Pre-Order in Q2 2020|
|19x9.5"||ET35||~20.2||1,900||$695||Pre-Order in Q2 2020|
|19x9.5"||ET28||~20.7||1,900||$695||Pre-Order in Q2 2020|
|19x9.5"||ET22||~20.1||1,900||$695||Pre-Order in Q2 2020|
|19x10.0"||ET33||~21.9||1,900||$700||Pre-Order in Q2 2020|
|19x10.0"||ET25||~22.2||1,900||$700||Pre-Order in Q2 2020|
|19x10.5"||ET45||~22.4||1,900||$705||Pre-Order in Q2 2020|
|19x10.5"||ET25||~22.5||1,900||$705||Pre-Order in Q2 2020|
|19x11.0"||ET44||~22.7||1,900||$710||Pre-Order in Q2 2020|
More from our Forged Lineup
Reinvented for Fully Forged
Our new EC-7R is a significant step forward. Now lighter and stronger than the original flow formed version thanks to "I" beam spokes and forged manufacturing. It’s enhanced with the features and benefits you’ve been waiting for.Explore